2024 Reliable Study Materials & Testing Engine for 300-410 Exam Success!
Validate your Skills with Updated 300-410 Exam Questions & Answers and Test Engine
Cisco 300-410 certification exam, also known as Implementing Cisco Enterprise Advanced Routing and Services, is designed for network engineers who want to validate their skills in implementing and troubleshooting advanced routing technologies and services. 300-410 exam is one of the six exams required to achieve the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification. It covers a wide range of topics, including Layer 3 technologies such as OSPF, BGP, and EIGRP, VPN technologies such as DMVPN and FlexVPN, and network services such as QoS, NAT, and DHCP.
Cisco 300-410 exam is a challenging test that requires thorough preparation and understanding of the concepts. Cisco offers a range of resources to help candidates prepare, including online courses, study materials, and practice exams. Candidates can also participate in the Cisco Learning Network community to connect with other professionals and gain insights from experts.
Cisco 300-410 certification exam is part of the Cisco Certified Network Professional (CCNP) Enterprise certification path. Implementing Cisco Enterprise Advanced Routing and Services certification path is designed to validate an individual's skills in enterprise networking technologies and solutions. By passing the 300-410 exam, candidates can demonstrate their proficiency in implementing advanced routing technologies and services in an enterprise network.
NEW QUESTION # 187
Refer to the exhibit.
Which action resolves the failed authentication attempt to the router?
- A. Configure aaa authorization console command on line vty 0 4
- B. Configure aaa authorization login command on line console 0
- C. Configure aaa authorization console global command
- D. Configure aaa authorization login command on line vty 0 4
Answer: C
Explanation:
In the debug output, we see that the Authorization (not Authentication) failed so we need to correct the authorization. In order to enable authorization, we must use the global command
"aaa authorization console" first.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/a1/sec-a1-cr-book/sec-cr-a1.html
NEW QUESTION # 188
Refer to the exhibit.
An engineer configured NetFlow on R1, but the NMS server cannot see the flow from ethernet 0/0 of R1.
Which configuration resolves the issue?
- A. flow monitor Flowmonitor1
source Ethernet0/0 - B. interface Ethernet0/1
ip flow monitor Flowmonitor1 input
ip flow monitor Flowmonitor1 output - C. interface Ethernet0/0
ip flow monitor Flowmonitor1 input
ip flow monitor Flowmonitor1 output - D. flow exporter FlowAnalyzer1
source Ethernet0/0
Answer: C
NEW QUESTION # 189
Refer to the exhibit.
The network administrator can see the DHCP discovery packet in R1. but R2 is not replying to the DHCP request. The R1 related interface is configured with the DHCP helper address. If the PC is directly connected to the FaO/1 interface on R2, the DHCP server assigns as IP address from the DHCP pool to the PC. Which two commands resolve this issue? (Choose two.)
- A. ip dhcp relay information trust-all command on R2
- B. service dhcp-relay command on R1
- C. ip dhcp relay information enable command on R1
- D. ip dhcp option 82 command on R2
- E. service dhcp command on R1
Answer: D,E
NEW QUESTION # 190 
Refer to the exhibit. The network administrator configured the branch router for IPv6 on the E 0/0 interface The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?
- A. Enable the IPv4 address family under the router ospfv3 4 process by using the address-family ipv4 unicast command
- B. Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E 0/0 interface.
- C. Disable IPv6 on the E 0/0 interface using the no ipv6 enable command
- D. Enable the IPv4 address family under the E 0/0 interface by using the address-family Ipv4 unicast command
Answer: A
NEW QUESTION # 191
Refer to the exhibit.
The network administrator configured the Chicago router to mutually redistribute the LA and NewYork routes with OSPF routes to be summarized as a single route in EIGRP using the longest summary mask:
After the configuration, the New York router receives all the specific LA routes but the summary route. Which set of configurations resolves the issue on the Chicago router?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 192
How does an MPLS Layer 3 VPN differentiate the IP address space used between each VPN?
- A. by RD
- B. by address family
- C. by MP-BGP
- D. byRT
Answer: A
NEW QUESTION # 193
Drag and drop the addresses from the left onto the correct IPv6 filter purposes on the right.
Answer:
Explanation:
NEW QUESTION # 194
An engineer configured access list NON-CISCO in a policy to influence routes.
What are the two effects of this route map configuration? (Choose two.)
- A. Packets are not evaluated by sequence 10.
- B. Packets are evaluated by sequence 10.
- C. Packets are forwarded using normal route lookup.
- D. Packets are forwarded to the default gateway.
- E. Packets are dropped by the access list.
Answer: B,D
Explanation:
Section: Mixed Questions
NEW QUESTION # 195
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday - Sunday night hours only. Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 196
Refer to the exhibit.
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eigrp stub command on R2.
- B. Issue the no eigrp stub command on R1
- C. Issue the eigrp stub command on R1.
- D. Issue the no eigrp stub command on R2.
Answer: B
NEW QUESTION # 197
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Exclude the EXP bit
- B. Impose the label
- C. Pop the label
- D. Include the EXP bit
Answer: C
Explanation:
Explanation
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet.
Note: pop means remove the top MPLS label
NEW QUESTION # 198 
Refer to the exhibit. A network administrator configured mutual redistribution on R1 and R2 routers, which caused instability in the network.
Which action resolves the issue?
- A. Set a tag in the route map when redistributing EIGRP into OSPF on R1, and match the same tag on R2 to deny when redistributing OSPF into EIGRP.
- B. Advertise summary routes of EIGRP to OSPF and deny specific EIGRP routes when redistributing into OSPF.
- C. Apply a prefix list of EIGRP network routes in OSPF domain on R1 to propagate back into the EIGRP routing domain.
- D. Set a tag in the route map when redistributing EIGRP into OSPF on R1, and match the same tag on R2 to allow when redistributing OSPF into EIGRP.
Answer: A
Explanation:
Section: Mixed Questions
NEW QUESTION # 199
An engineer configured a DHCP server for Cisco IP phones to download its configuration from a TFTP server, but the IP phones failed to toad the configuration What must be configured to resolve the issue?
- A. DHCP option 69
- B. DHCP option 66
- C. BOOTP port 68
- D. BOOTP port 67
Answer: B
Explanation:
NEW QUESTION # 200
Refer to the exhibit.
An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?
- A. spanning-tree portfast bpduguard
- B. spanning-tree loopguard default
- C. spanning-tree backbonesfast
- D. no spanning-tree uplinkfast
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and management/dnacenter/tech_notes/b_dnac_sda_lan_automation_deployment.html
NEW QUESTION # 201
Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.
Answer:
Explanation:
Explanation
Graphical user interface, chart Description automatically generated
NEW QUESTION # 202
Refer to the exhibit.
Refer to the exhibit. An administrator must harden a router, but the administrator failed to test the SSH access successfully to the router. Which action resolves the issue?
- A. Configure SSH on the remote device to log m using SSH
- B. SSH syntax must be ssh -I user ip to log in to the remote device
- C. SSH must be allowed with the transport output ssh command
- D. Configure enable secret to log in to the device
Answer: B
NEW QUESTION # 203
Refer to the exhibit.
An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries. Which action ensures consistency between the two times?
- A. Configure the service timestamps log datetime localtime command in global configuration mode.
- B. Configure the logging clock synchronize command in global configuration mode.
- C. Configure the service timestamps log uptime command in global configuration mode.
- D. Make sure that the clock on the device is synchronized with an NTP server.
Answer: D
NEW QUESTION # 204 
Refer to the exhibit. The engineer configured and connected Router2 to Router1. The link came up but could not establish a Telnet connection to Router1 IPv6 address of 2001:DB8::1. Which configuration allows Router2 to establish a Telnet connection to Router1?
- A. permit ICMPv6 on access list INGRESS for Router2 to obtain IPv6 address
- B. IPv6 address on GigabitEthernet0/0
- C. permit ip any any on access list EGRESS2 on Router1
- D. jpv6 unicast-routing
Answer: B
Explanation:
Explanation
--------------------------R1--------------------------------------------- interface Ethernet0/0 ip address 209.165.201.1 255.255.255.0 ip access-group EGRESS2 out ipv6 address 2001:DB8::1/64 end
----------------------R2-------------------------------------------------- interface Ethernet0/0 ip address 209.165.201.25 255.255.255.0 ipv6 address 2001:DB8::2/64 ipv6 address autoconfig ipv6 nd autoconfig default-route ipv6 nd cache expire 60 ipv6 nd ra suppress ipv6 traffic-filter INGRESS in end IOU_Router2#telnet 2001:DB8::1 Trying 2001:DB8::1 ... Open IOU_Router1>
------------------------------------------------------------------------------
NEW QUESTION # 205
Refer to the exhibit.
An IT staff member comes into the office during normal office hours and cannot access devices through SSH Which action should be taken to resolve this issue?
- A. Configure the correct time range.
- B. Modify the access list to correct the subnet mask
- C. Configure the access list in the outbound direction.
- D. Modify the access list to use the correct IP address.
Answer: D
Explanation:
Explanation
To ACL should be permit tcp 101
NEW QUESTION # 206
Refer to the exhibit.
An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired. Which command fixes the issue?
- A. R1(config)#ip sla track 1
- B. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1
- C. R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1
- D. R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2
Answer: C
NEW QUESTION # 207
Refer to the exhibit.
A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center. The Catalyst 9300 is added successfully However the WLC is showing [ error "uncontactable" when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?
- A. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.
- B. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.
- C. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
- D. Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html#anc12
NEW QUESTION # 208
Refer to the exhibit.
Which configuration configures a policy on R1 to forward any traffic that is sourced from the 192.168.130.0/24 network to 17.20.20.0/30 network?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 209
Refer to the exhibit.
An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting. Which command must be used in configuration mode to enable SSH on the device?
- A. no ip ssh disable
- B. ip ssh enable
- C. crypto key generate rsa
- D. ip ssh version 2
Answer: C
NEW QUESTION # 210
Refer to the exhibit.
The administrator noticed that the connection was flapping between the two ISPs instead of switching to ISP2 when the ISP1 failed. Which action resolves the issue?
- A. Include a valid source-interface keyword in the icmp-echo statement.
- B. Modify the static routes to refer both to the next hop and the outgoing intertace.
- C. Reference the track object 1 on the default route through ISP2 instead of ISP1.
- D. Modify the threshold to match the administrative distance of the ISP2 route.
Answer: D
NEW QUESTION # 211
......
Regular Free Updates 300-410 Dumps Real Exam Questions Test Engine: https://prep4tests.pass4sures.top/CCNP-Enterprise/300-410-testking-braindumps.html